NavCom LAND-PAK Rev.F - Manual (Page 80)

LAND-PAK™ User Guide – Rev. F
5-80
3. Click Connect to connect to the SF-3040.
4. On the Link Configure dialog box (refer to Figure
40), select Internal UHF Radio as the Link
Device. The GNSS Port is Internal.
5. Select a Data Format from the drop-down list.
6. Click Connect.
Figure 40: Link Configure
7. On the Radio Setup dialog (refer to Figure 41),
set the network ID (the Base and Rover radio
network ID’s must match), type a frequency in the
Frequency text box (between 403.000 and
473.000MHz in 0.025MHz steps with 25KHz
channel spacing or 0.0125MHz steps with
12.5KHz channel spacing), and set the transmit
power.
8. Click OK.