NavCom LAND-PAK Rev.F - Manual (Page 57)

LAND-PAK™ User Guide – Rev. F
4-56
The unit is now ready for software installation. See
Chapter 5: Field Genius for installation instructions.
For SurvCE software installation, refer to
the SurvCE Integration User Guide for
instructions.
SF-3040 UHF Radio Modem Configuration
This section provides steps to initially configure the
LAND-PAK radio modems. Configuration is almost
identical for both the base station and rover radio
modems.
A 1-Watt internal, removable, user-configurable UHF
radio modem (PN 90-213034-01) is included with the
LAND-PAK system.
The UHF module is configured via the
FieldGenius software on the Nautiz X8
collector.
An optional 35W boost radio is available
for use when using the radio as a base
station and more than 1W of power is
required. The boost radio is connected
via a com port and is not controlled via
FieldGenius; see Appendix B for details.
Licensing Requirements
This radio device requires an FCC license prior to
operation in the United States. Other countries may
have similar requirements. It is the user’s
responsibility to acquire all applicable operator
licenses.