NavCom LAND-PAK Rev.F - Manual (Page 40)

LAND-PAK™ User Guide – Rev. F
1-38
measurement data for the in-office static and rapid
static work from recorded data.
StarPoint is a complete desktop precise point
positioning program created for surveyors,
contractors and engineers. Prior to shipment, each
LAND-PAK system identification information is loaded
into a master data base where a key-code to activate
the desktop software is generated.
Upon first use, the StarPoint software must have
internet access to acquire the registration information
from the master site. If subsequent receivers are
purchased, StarPoint will need to re-access the
registration site to update registration information.
StarPoint may be installed on any number of
computers and will only process NavCom receiver
data.
Refer to the supplied StarPoint User
Guide for details.