QVidium QVENC Encoder v17 User Manual
Page 12
User’s Manual v.17
QVidium
®
H.264 HD Video Codecs
™
Copyright 2011-2015 QVidium
®
Technologies, Inc.
Page 12 of 73
Rear View
– Power, Video/Audio I/O Connectors, & RS-232 Port
Ref
Component
Description
1 AC Power
Auto-sense AC power input (100-240 VAC, 250-150 mA, 50/60 Hz).
2 RS-232
DB-9 RS-232 connector for future expansion.
3 DC Power
7 VDC to 20 VDC (1 to 3 Amps) alternative DC power input.
4 Error
Glows red for bit or format errors in SDI input stream.
5 3G / HD / ASI
Glows green to indicate 3Gbps or HD-SDI or ASI signal on SDI input.
6 SDI/ASI Input
SD-SDI, HD-SDI, 3G-SDI, & DVB-ASI input with embedded audio.
7 HDMI IN
HDMI HD Input.
8 SDI/ASI Output
SD-SDI, HD-SDI, 3G-SDI, & DVB-ASI output with embedded audio.
9 HDMI OUT
HDMI HD Output.
Note: Serial number (not shown) is located above DC power connector.
Important Safety Information:
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
CAUTION: The QVPRO Codec contains an internal 3V. Lithium battery. RISK OF
EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. USE ONLY
PANASONIC CR2032 20MM COIN-TYPE BATTERY OR EQUIVALENT. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
5
1
2
2
3
4
6
7
8
9