QVidium QVENC Encoder v17 - Manual (Page 37)

User’s Manual v.17 QVidium
®
H.264 HD Video Codecs ™
Copyright 2011-2015 QVidium
®
Technologies, Inc. Page 37 of 73
Figure 3b: Decoder profile : “Network Tab”
5.2.2 Network Tab
On the Network tab, shown above in Figure 3b, enter the desired IP Transport type (ARQ, RTP, or
UDP). Select ARQ to enable error correction. (ProMPEG Forward Error Correction for decoding is
available as an unsupported feature upon request.) ARQ uses RTP over UDP transport. RTP adds
statistics to the UDP header to help keep track of packet loss in the Status display. UDP is most
compatible with third-party video encoders. Enter the UDP Port on which to receive IP video
packets. Enter a Multicast Address if receiving multicast Ethernet or IGMP v3 packets,
otherwise, leave this field blank. You can restrict the receipt of a multicast stream to a specific
source IP address by entering a Multicast Source IP Address. Enter an input Jitter buffer,
specified in milliseconds, to smooth variations in packet delay and fix packet ordering problems.
The decoder is designed to recover from brief interruptions in the input. However, if you require
that the decoder recover from dynamic changes in the format, encoding or resolution of the input,
we suggest that you enable the Detect video break feature for IP/Ethernet input. You can set the