QVidium QVENC Encoder v17 - Manual (Page 13)

User’s Manual v.17 QVidium
®
H.264 HD Video Codecs ™
Copyright 2011-2015 QVidium
®
Technologies, Inc. Page 13 of 73
1.8 System View
– QVENC
Front View
– Computer Interface ports and Indicators
(All indicator lights either glow green or are off.)
Ref Indicator/Switch Description
1 SDI Glows green with active SD-SDI or HD-SDI input.
2 CVBS* Glows green with a valid composite or S-Video input signal.
3 Power Glows green when the power is connected and unit is on.
4 Reset Various reset functions. See description in manual.
*Note: Whether this indicates Composite (CVBS) or S-Video (Y/C) depends upon video input
selection from last time encoder was started. Defaults to CVBS indicator at power-on.
Ref Port Description
5 USB 2 USB 2.0 Ports (external storage or LCD console or LAN2).
6 Console RS-232 Console Interface via DB-9 Connector.
7 LAN LAN1 autosensing 10/100/1000-Base-TX Gigabit Ethernet Ports.
8 DC Power* Alternate DC power input (7 – 20 Vdc).
*Note: DC Power input can be used simultaneously with AC input as an emergency backup,
or by itself.