QVidium QVENC Encoder v17 User Manual
Page 14
User’s Manual v.17
QVidium
®
H.264 HD Video Codecs
™
Copyright 2011-2015 QVidium
®
Technologies, Inc.
Page 14 of 73
Rear View
– Power, Video/Audio I/O Connectors, & RS-232 Port
Ref
Component
Description
1 AC Power
Auto-sense AC power input (100-240 VAC, 250-150 mA, 50/60 Hz).
2 ASI Input
Optional: ASI Input with indicator LEDs for ASI daughtercard.
3 ASI Output
Optional: ASI Output for ASI daughtercard.
4 Y/C (S-Video)
S-Video analog video input (NTSC and PAL).
5 CVBS (Composite) Composite analog video input (NTSC and PAL).
6 Audio Inputs
3.5 mm analog audio inputs for channel ½ and ¾ stereo input pairs.
7 S/PDIF
Optical digital audio input fo AC3 (Dolby Digital) audio.
8 SDI Input
SDI video input, auto-detects SD-SDI, HD-SDI, and 3G-SDI input.
9 3G / HD / SD
Glows green to indicate 3Gbps, HD-SDI, or SD signal on SDI input.
10 Error
Glows red for bit or format errors in SDI input stream.
Note: Serial number (not shown) is located above Y/C and CVBS connectors.
Important Safety Information:
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
CAUTION: The QVENC Codec contains an internal 3V. Lithium battery. RISK OF
EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. USE ONLY
PANASONIC CR2032 20MM COIN-TYPE BATTERY OR EQUIVALENT. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
6
1
2
2
4
5
7
8
9
10
3
2