Skutch Electronics BA-1000 V2.90 - Manual (Page 11)

Version 2.90 Page 11
•
Consent Feature
This feature allows you to ask for the called
party’s consent before playing the message. The
person must dial a digit on his phone if he wants to
hear the message; if he doesn’t, the unit hangs up.
This feature can be setup in two different modes,
Dial to listen and Dial to disconnect. This is the
most reliable form of disconnect available.
• 16 Digit Pre-Dial String
The BA-1000 supports a pre-dial string of up to
16 digits. The pre-dial string can contain touch tone
digits and control codes that are dialed before each
phone number; and it includes features such as
variable pause, return dial tone detect, long touch
tones and touch tone * and #.
• Full Number Editing
The BA-1000 has an edit mode which allows
the user to edit telephone numbers in the dialing
files. It also has a feature that will automatically
delete duplicate numbers in memory, and a search
mode that allows the user to search for a specific
number. The unit also has a fast scan feature for a
quick view of the numbers and their dialing results.
• Computer Linkage
With the use of our optional software package,
telephone numbers can be converted and stored
directly to the ZIP cartridge the BA-1000 uses.
Then, just put the ZIP cartridge into the BA-1000
system and it is ready to call those numbers. This
means that numbers from a database, or a purchased
mailing list, can be transferred directly into the BA-
1000 system.
• Text Printer Support
A printer can be directly connected to the BA-
1000 to provide the ultimate in record keeping for
your dialing sessions. The system will print the:
entry position of the phone number, the phone
number, the number of dialing attempts for that
phone number, the number of times that phone
number has been logged as a “LEAD”, the date that
phone number was last logged as a “LEAD”, the
date that phone number was last called, any polling
question results and the call status of the phone
number.
•
Power Out Protected
The numbers stored on disk and the setup and
clock information is backed up with a 10 year
battery. If power fails at any time, the unit will
remember if it was dialing or in answer mode, and it
will pick up where it left off.
Installation
• Location
When selecting a location for the system, the
following conditions MUST be avoided to stay
within warranty:
Temperatures above 95 ° F.
Temperatures below 65 ° F.
Carpeted areas that produce Static Electricity.
High dust/tobacco smoke areas.
Exposure to direct sunlight.
The SYSTEM and the POWER CUBE should
be located in a well ventilated area. It should be
noted that the POWER CUBE can get quite warm
during operation. Make sure that both a three-prong
power outlet and a proper telephone jack are within
six feet of the installation site.
• Power
The SYSTEM can be used on a three-prong
grounded 110VAC power outlet. This is needed for
proper protection of the unit's circuitry. Power
circuits that are used for any heavy equipment such
as large freezers, blowers, heaters, copiers, or any
electrical equipment that contains large motors,
should be avoided. Heavy electrical equipment can
cause power glitches over the power line which
could interfere with the operation of the system. If
your power lines are excessively noisy a power filter
MIGHT solve the problem.
• Phone Connection
The system's telephone line requirements are
the same as a standard telephone. Its connection to
the telephone line is the same as any NORMAL