Skutch Electronics BA-1000 V2.90 - Manual (Page 17)

Version 2.90 Page 17
5 Disk Tools
The BA-1000 offers several basic disk utilities
by pressing Escape, <PAUSE>, 5, #. In this mode,
you can format the disk to prepare it for operation,
you can copy your phone number files, and you can
copy your message files.
• Format Disk
This option allows you to format a ZIP 100 disk
to prepare it for usage in the system. To enter this
mode, press Escape, <PAUSE>, 5, # and the display
will show the following:
1=Format Disk
3=Next Option
Press 1 and the display will show:
1=Quick Format
3=Full Format
Normally you will press 1 for a quick format.
If you suspect the disk may have bad spots, you can
press 3 and the system will perform a complete
format, erasing all data on the disk and swapping the
bad spots for good ones. If you select the full
format, the display will show:
Formatting Disk
- 00% Complete –
When the formatting completes, or you selected
1, the display will show:
Formatting Disk
- Please Wait –
When the formatting is totally finished, the
display will show:
Format Complete
--- Press # ---
When you press #, the system will go through
the initial diagnostic testing, and test the newly
prepared disk, then return you to the MENU.
•
Copy Prompts
This option allows you to copy the outgoing
message and TAD prompts from one disk to another
disk. To enter this mode, press Escape, <PAUSE>,
5, #, 3 and the display will show the following:
1=Copy Prompts
3=Next Option
Press 1 and the system will start copying the
prompts from the current (MASTER) disk and
prompt you for the MASTER and SLAVE disks as
needed.
•
Copy Do Not Dial List
This option allows you to copy the DO NOT
DIAL LIST from one disk to another disk. To enter
this mode, press Escape, <PAUSE>, 5, #, 3, 3 and
the display will show the following:
1=Copy No List
3=Next Option
Press 1 and the system will start copying the
DO NOT DIAL LIST from the current (MASTER)
disk and prompt you for the MASTER and SLAVE
disks as needed.
6 Dial Report
This mode allows you to view the basic
breakdown of the calls from the last dial session. To
enter this mode press Escape, <PAUSE>, 6, #. To
move through the report just press the # button at
each new entry.
• Total Calls
This entry shows the total phone call attempts
the system made during the last dial session. Press #
to continue to the next entry, or press Escape to
return to the MENU.
• Leads
This entry shows the total leads the system
detected during the last session. A lead is our term
for a completed call; a call where the person listens