Skutch Electronics BA-1000 V2.90 - Manual (Page 28)

Version 2.90 Page 28
Enter from 1 to 9 to choose from 1 to 9 rings
before the call becomes a No Answer, then press #
to go the next option. You can press Escape to exit
setup mode.
• Answer Detect Mode
This option allows you to change the answer
detect mode. The available answer detect modes
are: Normal mode, Hello mode and Answering
Machine Only mode.
0 = Normal Mode
Normal mode allows the system to activate on a
“Hello” response, a “Business” intro and an
“Answering Machine” message.
1 = Hello Mode
Hello mode makes the system activate only on
a “Hello” response; any other responses causes the
system to proceed to the next call.
2 = Answering Machine Only
Mode
Answering Machine Only mode makes the
system activate only to the message response period
of an answering machine; any other response causes
the system to proceed to the next call.
3 = HTAD Mode
Hello and Answering Machine mode makes the
system give your normal message whenever
someone responds with “Hello”; it will also give
your answering machine message to any response
longer than a “Hello”. Be aware that this will cause
the system to activate on most recorded messages
and business introductions as well.
The display will look as follows:
Answer Detect= 0
0 to 3 #=Next
Enter 0 for Normal mode, 1 for Hello mode, 2
for Answering Machine Only mode or 3 for HTAD
mode; press # to go to the next option. You can
press Escape to exit setup mode.
•
No Response hang up
This option allows you to set how many
unanswered questions the system will accept before
considering the call a hang up. The display will look
as follows:
Unanswer Ques= 1
1 to 9 #=Next
Enter from 1 to 9 to choose from 1 to 9
unanswered question before the call is a hang up;
press # to go the next option. You can press Escape
to exit setup mode.
•
In Ring Delay
This option allows you to select how many in
coming rings the system will wait before it activates,
when in Order Taking mode. The display will look
as follows:
InRing Delay= 2
1 to 9 #=Next
Enter from 1 to 9 to choose from 1 to 9 rings
before the system grabs the in coming call; press # to
go the next option. You can press Escape to exit
setup mode.
• Attended Mode
This option allows you to use the system in an
operator attended mode. Normally, the system
makes the calls unattended and gets the responses; if
you want a live operator to talk with the called party,
you can use attended mode. When attended mode is
enabled, the system will beep at you, when a
response is detected, and wait for you to grab the
line; it will show the following message:
Operator Request
Pick up Phone
When you grab the line, the system will wait
for you to tell it what to do next; it will show the
following message:
1=Play Message
3=Do Next Call