Skutch Electronics BA-1000 V2.90 - Manual (Page 24)

Version 2.90 Page 24
1=Change 3=Next
19167866186
When the system has found a match to your
search string, it gives you the option to change the
entry by pressing 1, or to find the next match by
pressing 3.
• Duplicate Delete
This mode makes the system search through the
current dialing file and mark all duplicates for
deletion, so only one entry of each number stays in
the file. To use this feature, enter Escape,
<PAUSE>, 0, #, *, 4, #, and the system will show
the following:
0 Edit> 00000
Duplicate Delete
As the system marks the duplicates, the entry
number in the top right will change to show the
current entry number. Duplicate Delete can take
some time to fully search the file and mark
duplicates. If you need to stop this mode, press the
Escape button.
• File Restore
This feature restores all of the phone numbers
in a file, not marked for deletion, to New status. To
use this feature, enter Escape, <PAUSE>, 0, #, *, 5,
#; the display will show the following:
0-Edit> 00000
Making #’s New
As the system restores the phone numbers, the
entry number in the top right will change to show
the current entry number.
• Exiting Edit Mode
To exit Edit mode, press Escape from the main
edit screen. When you exit Edit mode, the system
will show the following:
0-Edit> 00000..
Compressing File
The 5 digits on the top right will show the
current entry number as the system compresses the
number file and deletes all the entries marked for
deletion.
* System Setup
The System Setup mode allows you to change
the operating parameters of the BA-1000. To enter
this mode, press Escape, <PAUSE>, *, #.
Following is a list of the setup options in the order
you will encounter them. You can use the # button
to advance to the next option, or you can change the
option and then press # to proceed.
• Change The Time/Date
The first option in System Setup is to set the
current time. The display will show the following:
Set CURRENT Time
1=Change #=Next
You can press 1 to change the current time or #
to proceed to the next option. You can press Escape
to exit setup mode.
Set The Current Day
Press 1 to change the time; the display shows:
Enter day, 1 – 7
#=Monday
The current day will be shown in the bottom of
the display. To change the day, press the
corresponding number followed by #; i.e. 1 for
Sunday, 2 for Monday, etc.
Set The Current Date
Now the display will show:
-- Enter Date –-
# = 01/01/1999
The current date will appear in the bottom of
the display. You can enter a new date followed by
#, or just press # to keep the current date.