Skutch Electronics BA-1000 V2.90 - Manual (Page 3)

Version 2.90 Page 3
3) Press 1 and it will show the following:
0-Entry> 00000 N
4) Enter: *, 8, # and it will show the following:
STARTING phone #
5) Enter the starting phone number exactly as you
would dial it, then #, #; i.e. 7 8 6 0 0 0 0 # #, and
it will show the following:
0-Entry> 00000 N
Making Numbers
6) When it shows the following, press *, 9, #:
0-Entry> 10000 N
7) When it shows the following, press # and the
system will start dialing:
0-Entry> 00000
---- #=Dial ----
8) The system will show the following when done:
End of Session
--- Press # ---
9) Press # to return to MENU.
• Dialing Specific Phone
Numbers
1) Press Escape and wait until it shows the
following:
0-Menu-Ver 2.9-A
–Press a Number-
2) Enter: 2 then # and it will show the following:
1=NEW from Start
3=Add to End
3) Press 1 and it will show the following:
0-Entry> 00000 N
4) Enter each phone number exactly as you would
dial it, followed by #.
5) After you have entered the last number, enter: *,
9, #, and it will show the following:
0-Entry> 00000
---- #=Dial ----
6) Now press # and the system will call those
numbers.
7) The system will show the following when done:
End of Session
--- Press # ---
8) Press # to return to MENU.
• Add #'s to No Dial List
To add phone numbers to the Do Not Dial list,
so the unit won't call them, do the following:
1) Press Escape and wait until it shows the
following:
0-Menu-Ver 2.9-A
–Press a Number-
2) Enter: 4 then # and it will show the following:
Current File = 0
#=Next 0-9 or *
3) Enter: * then Escape and it will show the
following:
N-Menu-Ver 2.9-A
–Press a Number-
4) NOTE: The display now shows an “N” in the
top left.
5) Enter: 2 then # and it will show the following:
1=NEW from Start
3=Add to End
6) Press 3 and it will show something like the
following: