Skutch Electronics BA-1000 V2.90 - Manual (Page 4)

Version 2.90 Page 4
N-Entry> 00000 N
7) Enter each FULL phone number (including Area
Code) to NOT dial, followed by #.
8) When finished entering numbers, press Escape
and it will show the following:
N-Menu-Ver 2.9-A
–Press a Number-
9) Enter: 4 then # and it will show the following:
Current File = N
#=Next 0-9 or *
10) Enter: 0 then Escape and it will show the
following:
0-Menu-Ver 2.9-A
–Press a Number-
• Remove a # from No Dial
List
To remove a phone number from the Do Not
Dial list, do the following:
1) Press Escape and wait until it shows the
following:
0-Menu-Ver 2.9-A
–Press a Number-
2) Enter: 4 then # and it will show the following:
Current File = 0
#=Next 0-9 or *
3) Enter: * then Escape and it will show the
following:
N-Menu-Ver 2.9-A
–Press a Number-
4) NOTE: The display now shows an “N” in the
top left.
5) Enter: 0 then # and it will show the following:
N-Edit>
6) Enter: *, 3, # and it will show the following:
- Search Mode -
7) Now enter the phone number you are trying to
find, then #. If it cannot find the number, it will
show the following; then skip to step 14:
N-Edit>
8) If it finds the number, it will show the number in
the following screen:
1=Change 3=Next
19167866186
9) You can press 1 if this is the correct number to
change, or 3 to keep looking.
10) After pressing 1 to change, it will show the
following:
N-Edit> 00000 N
19167866186
11) Press # and the “N” in the top right will be
blinking.
12) Press/release the * ten times to change the “N”
to an “x” as as follows:
N-Edit> 00000 x
19167866186
13) Press # and it will show the following:
N-Edit>
14) Press Escape to finish and return to MENU as
follows:
N-Menu-Ver 2.9-A
–Press a Number-
15) Enter: 4 then # and it will show the following: