Teac MX-2424 Tutorial - Manual (Page 38)

- 38 -
LOCATE FUNCTIONS LOCATE FUNCTIONS LOCATE FUNCTIONS LOCATE FUNCTIONS
Project Head & Tail
Head
Press [Rewind] once for a normal rewind speed.
Press [Rewind] twice in rapid succession to go to the project's Head.
Tail
Press [Fast Forward] once for a normal fast forward speed.
Press [Fast Forward] twice in rapid succession to go to the project's Tail.
Memory Locations
There are times when you need more than just a pen and paper to keep track of
location points. Fortunately, the MX-2424 can remember up to 100 locations that are
automatically stored in your project file. Locations can be stored or recalled using the
numeric keypad.
Storing a Location
1) Press [CAPT/SPACE] to capture a location. The MX-2424 can be playing, recording,
or stopped—it doesn't matter.
2) Enter a two digit number (00-99) on the numeric keypad (for example, 01, or 15).
This number is the memory position of your stored location. The LCD screen will display
a message similar to,
MX-01 00:01:05:24
MEM15 00:01:05:24
3) To return to the regular time code screen, press [CLEAR/CANCEL].
• HOT TIP! — You can repeatedly press [CAPT/SPACE] while the transport is in motion
updating the captured point until a memory location is chosen with the numeric keypad.