Teac MX-2424 Tutorial - Manual (Page 43)

- 43 -
SCSI Connection Rules
1) Only Approved SCSI devices should be connected to the MX-2424.
2) Only make SCSI connections (and disconnections) with the power off.
3) Narrow SCSI devices (DVD-RAM drives) always go at the physical end of a SCSI
chain.
4) Each SCSI device in a chain must have its own unique SCSI ID number.
5) The MX-2424 supports up to four devices on its SCSI bus.
7) A SCSI chain's total cable length should not exceed 6 feet.
8) A SCSI chain must always be properly terminated.
9) High quality SCSI cables will greatly improve the reliability of a SCSI bus.
• HOT TIP! — Approved devices are hard drives, removable media systems, and other
SCSI peripherals that have been successfully tested with the MX-2424. To see the
most current approved device list, visit our web site (www.TASCAM.com).