Verilink DPRI 2922 (880-503142-001) Product Manual - Manual (Page 21)

Quick Set-Up
Verilink DPRI 2922 2-5
6. Press L, then 1, E NTER , then 2 to select B8ZS as the line coding
for Net Port 1. Press L, then 2, E NTER , then 2 to select B8ZS as
the line coding for Net Port 2.
7. Press B, then 1, E NTER , then 1 to select 0db as the line build out
for Net Port 1. Press B, then 2, E NTER , then 1 to select 0db as the
line build out for Net Port 2.
8. Press ND, then 1, E NTER , then 1 to select NONE as the network
density for Net Port 1. Press ND, then 2, E NTER , then 1 to select
NONE as the network density for Net Port 2.
9. Press NL, then 1, E NTER , then Y to allow network initiated loops
on Net Port 1. Press NL, then 2, E NTER , then Y to allow network
initiated loops on Net Port 2.
10. Press A, then 1, E NTER , then 0 if you do not want the alarm
declare time enabled on Net Port 1. Type a number 1 through
127 to indicate the number of seconds to elapse before
declaring an alarm condition to the system for Net Port 1.
Press A, then 2, E
NTER , then 0 if you do not want the alarm
declare time enabled on Net Port 2. Type a number 1 through
127 to indicate the number of seconds to elapse before
declaring an alarm condition to the system for Net Port 2.
11. Press DL, then 1, E NTER , then Y to enable FDL for Net Port 1.
Press DL, then 2, E NTER , then Y to enable FDL for Net Port 2.
12. Press S, then 1, E NTER , then the number 24 to set the signalling
channel timeslot for Net Port 1. Press S, then 2, E NTER , then the
number 24 to set the signalling channel timeslot for Net Port 2.
13. Press E, then 1, E NTER , then 1 to enable the inband for Net Port
1. Press E, then 2, E NTER , then 2 to enable ISDN for Net Port 2.
FDL Options Facility Data Link is an ESF T1 port configuration option. The ESF
FDL transmits framing information, error events, and loopback
controls. FDL uses 4 kbit/s of bandwidth to transmit data. If you
plan on using FDL, ensure that ESF framing format has been
selected.
1. Press F to access the Configuration Menu (FDL Options).