Verilink DPRI 2922 (880-503142-001) Product Manual - Manual (Page 50)

Configuring the DPRI 2922 Via the NCM 2000 Craft Interface
3-20
Verilink DPRI 2922
PRI Call Profile
Configuration
Menu
An ISDN Call Profile defines the network layer information required
to build ISDN backup calls. Each circuit build that requires an ISDN
backup circuit must have a call profile reference assigned to it.
To access the PRI Call Profile Configuration Menu, Figure 3-12,
enter C from the PRI Configuration Menu, Figure 3-10. Select the
port associated with the call profiles to be changed.
Figure 3-12 PRI Call Profile Configuration Menu
Table 3-12 PRI Call Profile Configuration Menu Parameters
Port n PRI Call
Profile
Configuration
Menu
From the PRI Call Profile Configuration Menu, Figure 3-12,
selecting 1 or 2 will display a Port PRI Call Profile Configuration
Menu for that particular port. The example below shows that for
Port 1.
Figure 3-13 Port 1 PRI Call Profile Configuration Menu (sample)
En Security Level—If security is enabled, any number NOT found in the security
table will be rejected. For this version of firmware, use “No Checks”.
1) No checks
2) Check own
3) Check
remote
4) Check own
and remote
Ln L2 Auto Establish—Counts on ISDN CO switch to activate layer two. Normal
is “No”. If set to “Yes”, the DPRI module will continually try to establish layer
2 (link layer).
Yes or No
(Y/N)
X Exit to the PRI Configuration Menu, Figure 3-10, Table 3-10.
Command Description Options
Command Description
1 Port 1 Call Profile—Displays the Port 1 PRI Call Profile Configuration Menu, Figure 3-13,
Table 3-13.
2 Port 2 Call Profile—Displays the Port 2 PRI Call Profile Configuration Menu.
X Exit to the PRI Port Configuration Menu, Figure 3-11, Table 3-11.
[[0.0.0.5] [1,2] DPRI 2922 > c
-- DPRI 2922 PRI CALL PROFILE CONFIGURATION MENU --
1) Port 1 Call Profile 2) Port 2 Call Profile
X) Exit this screen
[0.0.0.5] [1,2] DPRI 2922 >
-- DPRI 2922 PORT 1 PRI CALL PROFILE CONFIGURATION MENU --
Ref Own Number Ext Number Bandwidth Direction Status
A) Add Call Profile M) Modify Call Profile
S) Set Call Action D) Delete Call Profile
X) Exit this screen
[0.0.0.5] [1,2] DPRI 2922 >