Verilink DPRI 2922 (880-503142-001) Product Manual - Manual (Page 63)

Configuring the DPRI 2922 Via the NCM 2000 Craft Interface
Verilink DPRI 2922
3-33
When one of these options is selected, the previous 24 hour data is
displayed in 15 minute increments for a total of 96 blocks of time.
Press E
NTER to exit these screens.
Net Port Alarm
Threshold Status
Menu
Enter T from the Performance/Status Menu, Figure 3-21, to access
the Net Port Alarm Threshold Status Menu, Figure 3-23. This
screen shows the threshold intervals set in the Net Port Alarm
Threshold Configuration Menu, Figure 3-26.
It also displays the counts for each type of alarm. When the alarm
count exceeds its threshold value set in the Net Port Alarm
Threshold Configuration Menu, a “Y” displays after the count.
Figure 3-23 Net Port Alarm Threshold Status Menu
Counter Menu Enter C from the Performance/Status Menu, Figure 3-21, to access
the Counter Menu. These counts are continuous until reset using
the Rn option.
Rn Reset Registers: Use this option to clear out all counts and reset all registers to zero for a
particular port.
X Exit this screen—Exits the Performance/Status Menu (24hr T1 Performance Data Summary)
and returns to the Performance/Status Menu, Figure 3-21.
Command Description
[0.0.0.5] [1,2] DPRI 2922 > t
-- DPRI 2922 NET PORT ALARM THRESHOLD STATUS MENU --
Current Threshold Status PORT 1 PORT 2
LOF counts(exceeded) 0(N) 0(N)
interval 0 0
LOS counts(exceeded) 0(N) 0(N)
interval 0 0
RAI counts(exceeded) 0(N) 0(N)
interval 0 0
AIS counts(exceeded) 0(N) 0(N)
interval 0 0
BPV counts(exceeded) 0(N) 0(N)
interval 0 0
ES 15min counts(exceeded) 0(N) 0(N)
ES 24hr counts(exceeded) 0(N) 0(N)
SES 15min counts(exceeded) 0(N) 0(N)
SES 24hr counts(exceeded) 0(N) 0(N)
Press enter to continue