Verilink HDM 2180 (880-503048-001) Product Manual - Manual (Page 22)

HDM 2180 Quick Set-Up
2-4 Verilink HDM 2180 User Manual
Figure 2-3 Configuration Menu
Network Port The DS3 network port is usually configured before the HSSI port.
Press E
NTER after typing each command letter.
1. Type “P”, to display the Port Configuration Menu ( Figure 2-4 )
Figure 2-4 DS3 Configuration Menu
2. Type “R” to toggle the Performance Control to On.
3. Type “M” to set the data rate for both Near End (NE) and Far
End (FE) data ports simultaneously.
4. Type “D” to enter the data rate for the HDM module. Enter the
maximum rate available, 28 T1, or 44.7 Mbit/s.
5. All ID parameters are optional. Enter them as your needs
require.
6. Type “I” to enable inband.
7. Exit this menu and return to the Configuration Menu.
A [127.255.255.0] [1,1] HDM 2180 > c A [127.255.255.0] [1,1] HDM 2180 > c A [127.255.255.0] [1,1] HDM 2180 > c A [127.255.255.0] [1,1] HDM 2180 > c
-- HDM 2180 CONFIGURATION MENU --
-- HDM 2180 CONFIGURATION MENU -- -- HDM 2180 CONFIGURATION MENU -- -- HDM 2180 CONFIGURATION MENU --
P) Port Setup H) HSSI Setup
P) Port Setup H) HSSI Setup P) Port Setup H) HSSI Setup P) Port Setup H) HSSI Setup
x) Exit this screen
x) Exit this screen x) Exit this screen x) Exit this screen
A [127.255.255.0] [1,1] HDM 2180 > A [127.255.255.0] [1,1] HDM 2180 > A [127.255.255.0] [1,1] HDM 2180 > A [127.255.255.0] [1,1] HDM 2180 >
A [127.255.255.0] [1,1] HDM 2180 > p A [127.255.255.0] [1,1] HDM 2180 > p A [127.255.255.0] [1,1] HDM 2180 > p A [127.255.255.0] [1,1] HDM 2180 > p
-- HDM 2180 Port Configuration Menu --
-- HDM 2180 Port Configuration Menu -- -- HDM 2180 Port Configuration Menu -- -- HDM 2180 Port Configuration Menu --
- Line Code B3ZS
- Line Code B3ZS - Line Code B3ZS - Line Code B3ZS
- AIS C-Bit 0
- AIS C-Bit 0 - AIS C-Bit 0 - AIS C-Bit 0
T) Timing Recover Clock
T) Timing Recover Clock T) Timing Recover Clock T) Timing Recover Clock
B) Line Build Out Normal Cable <= 250 ft
B) Line Build Out Normal Cable <= 250 ft B) Line Build Out Normal Cable <= 250 ft B) Line Build Out Normal Cable <= 250 ft
R) Performance Control Off
R) Performance Control Off R) Performance Control Off R) Performance Control Off
M) Data Rate Mode Only NE
M) Data Rate Mode Only NE M) Data Rate Mode Only NE M) Data Rate Mode Only NE
D) Data Rate 22, (35.2 Mbps)
D) Data Rate 22, (35.2 Mbps) D) Data Rate 22, (35.2 Mbps) D) Data Rate 22, (35.2 Mbps)
E) Equipment ID
E) Equipment ID E) Equipment ID E) Equipment ID
L) Location ID
L) Location ID L) Location ID L) Location ID
F) Frame ID
F) Frame ID F) Frame ID F) Frame ID
U) Unit ID
U) Unit ID U) Unit ID U) Unit ID
A) Facility ID
A) Facility ID A) Facility ID A) Facility ID
P) Port ID
P) Port ID P) Port ID P) Port ID
C) Circuit ID
C) Circuit ID C) Circuit ID C) Circuit ID
G) Test Sig ID
G) Test Sig ID G) Test Sig ID G) Test Sig ID
I) Inband Control Disable
I) Inband Control Disable I) Inband Control Disable I) Inband Control Disable
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
A [127.255.255.0] [1,1] HDM 2180 >
A [127.255.255.0] [1,1] HDM 2180 > A [127.255.255.0] [1,1] HDM 2180 > A [127.255.255.0] [1,1] HDM 2180 >