Verilink HDM 2180 (880-503048-001) Product Manual - Manual (Page 53)

HDM 2180 Management: Using NCM 2000
Verilink HDM 2180 User Manual 4-7
HSSI Port
Configuration
Menu
Selecting H from the Configuration Menu displays the HSSI
Configuration Menu.
Figure 4-5 HDM 2180 HSSI Configuration Menu
M Data Rate Mode—Determines whether data rate changes made at this end are
propagated to the remote DS3 module as well. Selecting both NE and FE is
suggested.
1) NE/FE
2) Only NE
D Data Rate—The bandwidth which will be made available to the DTE on the
HSSI interface, expressed in increments of 1.6Mbit/s each. (21 × 1.6 = 33.6
Mbit/s). Enter a number within the range of 1 through 28. (28 represents
44.7 Mbit/s)
1—28
E Equipment ID—An optional parameter. Enter up to 10 characters to describe
your DTE. It will also prompt if you want to clear the string.
L Location ID—An optional parameter. Enter up to 11 characters to describe the
location of your DTE. It will also prompt if you want to clear the string.
F Frame ID—An optional parameter. Enter up to 10 characters to define the
Frame ID. It will also prompt if you want to clear the string.
U Unit ID—An optional parameter. Enter up to 6 characters to define the Unit ID.
It will also prompt if you want to clear the string.
A Facility ID—An optional parameter. Enter up to 38 characters to define the
Facility ID. It will also prompt if you want to clear the string.
P Port ID—An optional parameter. Enter up to 38 characters to define the Port
ID. It will also prompt if you want to clear the string.
C Circuit ID—An optional parameter. Enter up to 26 characters to define the
Circuit ID. It will also prompt if you want to clear the string.
G Test Sig ID—An optional parameter. Enter a single character to define the
Test Sig ID. It will also prompt if you want to clear the string.
I Inband Control—This option toggles between Enable and Disable for the
FEAC (Far End Access and Control) test requests using the C-bit overhead.
1) Enable
2) Disable
X Exit this screen—Returns you to the HDM Configuration Menu , Figure
4-3 .
Command Description Options
-- HDM 2180 HSSI Configuration Menu -- -- HDM 2180 HSSI Configuration Menu -- -- HDM 2180 HSSI Configuration Menu -- -- HDM 2180 HSSI Configuration Menu --
Test Mode Disabled Test Mode Disabled Test Mode Disabled Test Mode Disabled
P) Port Status OUT OF SERVICE P) Port Status OUT OF SERVICE P) Port Status OUT OF SERVICE P) Port Status OUT OF SERVICE
M) Configuration Mode Manual
M) Configuration Mode Manual M) Configuration Mode Manual M) Configuration Mode Manual
A) Data Scramble Disable
A) Data Scramble Disable A) Data Scramble Disable A) Data Scramble Disable
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
A [127.255.255.0] [1,6] HDM 2180 > A [127.255.255.0] [1,6] HDM 2180 > A [127.255.255.0] [1,6] HDM 2180 > A [127.255.255.0] [1,6] HDM 2180 >