Verilink HDM 2180 (880-503048-001) Product Manual - Manual (Page 23)

HDM 2180 Quick Set-Up
Verilink HDM 2180 User Manual 2-5
HSSI Port Set-up 1. Hook up the DTE (in this case, a router) to the HSSI port.
2. Type “H” to display the HSSI Configuration Menu.
Figure 2-5 HSSI Configuration Menu
3. Type “M” to toggle the port to Automatic operation.
4. Type “P” to toggle the port In Service.
5. Type “X” to exit to the Configuration Menu.
Your HDM 2180 is now configured and ready to be placed into
service. Connect the DS3 cables to the network port.
The three tri-color LEDs on the front panel (Network Port, Data Port,
System) should be lit solid green to indicate the module is properly
configured and equipment is operating normally.
A [127.255.255.0] [1,1] HDM 2180 > p A [127.255.255.0] [1,1] HDM 2180 > p A [127.255.255.0] [1,1] HDM 2180 > p A [127.255.255.0] [1,1] HDM 2180 > p
-- HDM 2180 HSSI Configuration Menu --
-- HDM 2180 HSSI Configuration Menu -- -- HDM 2180 HSSI Configuration Menu -- -- HDM 2180 HSSI Configuration Menu --
Test Mode Disabled
Test Mode Disabled Test Mode Disabled Test Mode Disabled
P) Port Status IN SERVICE
P) Port Status IN SERVICE P) Port Status IN SERVICE P) Port Status IN SERVICE
M) Configuration Mode Manual
M) Configuration Mode Manual M) Configuration Mode Manual M) Configuration Mode Manual
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
A [127.255.255.0] [1,1] HDM 2180 >
A [127.255.255.0] [1,1] HDM 2180 > A [127.255.255.0] [1,1] HDM 2180 > A [127.255.255.0] [1,1] HDM 2180 >