Verilink HDM 2180 (880-503048-001) Product Manual - Manual (Page 57)

HDM 2180 Management: Using NCM 2000
Verilink HDM 2180 User Manual 4-11
Figure 4-9
DS3 Port Status
Report
Selecting P from the Diagnostics Menu displays the DS3 Port
Status Report. Pressing the E
NTER key returns you to the
Diagnostics Menu.
Figure 4-10 DS3 Port Status Report
Loopback
Options Menu
Selecting L) Loopback Configure from the Diagnostics Menu
displays the Loopback Options Menu. See (
Table 4-9 ) for the types
of loopbacks available.
Figure 4-11 HDM 2180 Loopback Options Menu
DTE
or
Test
Set
DTE
or
Test
Set
Port 1
Framer
Framer
Port 1
Loopback A
Loopback B
[127.255.255.0] [1,6] HDM 2180 > p [127.255.255.0] [1,6] HDM 2180 > p [127.255.255.0] [1,6] HDM 2180 > p [127.255.255.0] [1,6] HDM 2180 > p
-- DS3 PORT STATUS REPORT --
-- DS3 PORT STATUS REPORT -- -- DS3 PORT STATUS REPORT -- -- DS3 PORT STATUS REPORT --
ALARM ----------------------- State
ALARM ----------------------- State ALARM ----------------------- State ALARM ----------------------- State
AIS No
AIS No AIS No AIS No
IDLE No
IDLE No IDLE No IDLE No
Yellow Alarm Yes
Yellow Alarm Yes Yellow Alarm Yes Yellow Alarm Yes
Frame Loss Yes
Frame Loss Yes Frame Loss Yes Frame Loss Yes
Signal Loss Yes
Signal Loss Yes Signal Loss Yes Signal Loss Yes
Local loopback Disabled
Local loopback Disabled Local loopback Disabled Local loopback Disabled
Payload loopback Disabled
Payload loopback Disabled Payload loopback Disabled Payload loopback Disabled
FEAC loopback Disabled
FEAC loopback Disabled FEAC loopback Disabled FEAC loopback Disabled
Far-End loopback Disabled
Far-End loopback Disabled Far-End loopback Disabled Far-End loopback Disabled
Press enter to continue
Press enter to continue Press enter to continue Press enter to continue
[127.255.255.0] [1,6] HDM 2180 > l [127.255.255.0] [1,6] HDM 2180 > l [127.255.255.0] [1,6] HDM 2180 > l [127.255.255.0] [1,6] HDM 2180 > l
-- HDM 2180 LOOPBACK OPTIONS MENU --
-- HDM 2180 LOOPBACK OPTIONS MENU -- -- HDM 2180 LOOPBACK OPTIONS MENU -- -- HDM 2180 LOOPBACK OPTIONS MENU --
A) Activate loopback D) Deactivate loopback
A) Activate loopback D) Deactivate loopback A) Activate loopback D) Deactivate loopback A) Activate loopback D) Deactivate loopback
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
[127.255.255.0] [1,6] HDM 2180 >
[127.255.255.0] [1,6] HDM 2180 > [127.255.255.0] [1,6] HDM 2180 > [127.255.255.0] [1,6] HDM 2180 >