Verilink HDM 2180 (880-503048-001) Product Manual User Manual

Page 48

Advertising

HDM 2180 Management: Using NCM 2000

4-2

Verilink HDM 2180 User Manual

• The letter surrounded by brackets (

[ ] ) designates the

location of the currently active module that can be referenced
and modified using the displayed menu.

• On initial log in, the brackets surround the module being used

as the log-in access point (for example, the NCM).

• The Main Menu option

S (shelf/slot) is used to move to a

desired module in the node.

Figure 4-1

, the Main Menu shows an HDM 2180 (designated by T)

in slot 1. From the S) shelf/slot command, the currently accessed
module indicated by the square brackets ([ ]) has been changed to
the HDM 2180 in slot 1. The asterisk next to the N indicates that the
NCM 2000 module is the node master. The A at the beginning of the
prompt line indicates that the NCM 2000 you are accessing is the
active NCM master.

Figure 4-1 NCM Controller Menu (Showing HDM 2180 at Shelf 1, Slot 1)

When accessing the HDM 2180 via the NCM 2000, many of the Craft
interface screens will differ from those accessed via the HDM 2180
Local Port (described in

Chapter 3

-- VERILINK NCM CONTROLLER : FW Rev 4.17, Dec 30 1997 12:33:20 --

-- VERILINK NCM CONTROLLER : FW Rev 4.17, Dec 30 1997 12:33:20 --
Site Name: Access Level: 2

Site Name: Access Level: 2

Site Name: Access Level: 2
Managing at NEAR end node [127.255.255.0] Node ID: 0

Managing at NEAR end node [127.255.255.0] Node ID: 0

<- SLOT ->

<- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -
1 D [T] *N

1 D [T] *N

1 D [T] *N
2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -
3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -
4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -

KEY:A=DIDCSU, B=DIU/DBU, C=CSU, D=DIU, E=SDIU, F=DIU/DDS, G=DHDM,

KEY:A=DIDCSU, B=DIU/DBU, C=CSU, D=DIU, E=SDIU, F=DIU/DDS, G=DHDM,
H=ATM/IMUX, I=IDCSU, J=PEP, M=IMUX, N=NCM, P=DPRI, Q=QUAD,

H=ATM/IMUX, I=IDCSU, J=PEP, M=IMUX, N=NCM, P=DPRI, Q=QUAD,

H=ATM/IMUX, I=IDCSU, J=PEP, M=IMUX, N=NCM, P=DPRI, Q=QUAD,
R=SUBRATE, T=HDM, U=DCSU, V=VCU, X=QPRI

R=SUBRATE, T=HDM, U=DCSU, V=VCU, X=QPRI

S) shelf/slot O) administration

S) shelf/slot O) administration
C) configuration D) diagnostics

C) configuration D) diagnostics

C) configuration D) diagnostics
P) performance/status F) display far end DS3 port identification

P) performance/status F) display far end DS3 port identification

P) performance/status F) display far end DS3 port identification
B) circuit manager A) alarm

B) circuit manager A) alarm

B) circuit manager A) alarm
R) remote end setup I) manufacturing info

R) remote end setup I) manufacturing info

R) remote end setup I) manufacturing info
X) exit this screen

X) exit this screen

A [127.255.255.0] [1,1] HDM 2180 >