ACTi MNR-310 - Manual (Page 110)

www.acti.com
MNR-310 System Administrator ’s Manual
110
Mode The FTP works in two very different manners, Active mode and Passive mode.
If your FTP server is behind the firewall or a NAT router, you have to use
“ Passive ” mode.
Remote Folder Input the upload path of the file. Default will be “ / ” to represent the root folder.
3. As all necessary information is filled in, click “ Test FTP Connection ” to test the connection.
If the NVR server pops up a “ Testing FTP connection was successful ” message, the
NVR server is ready to upload to this FTP server.
4. As the settings are confirmed, click “ Apply ” to save. The FTP settings here will be default
for every event rule.
System Log
The activities performed by logged-in users are recorded on the server as System Log . With
the access permission, a user may view, search and export this record for analysis or
investigation. This section will provide the instructions on how to read and search data in the
system log.
“ System Log ” is one of the resident buttons on top of the NVR server user interface, click
it to enter search window.