Joystick, Joystick configurations – ACTi MNR-310 User Manual
Page 140
MNR-310 System Administrator
’s Manual
Joystick
On the NVR server, other than user interface PTZ panel and mouse operation, you may also
control the PTZ movements by physical controllers. The NVR server supports two types of
controllers, both of which feature in a joystick with twelve buttons for users to assign specific
actions.
Model: IP Desktop
Manufacturer: CH Products
Model
: Extreme™ 3D Pro
Manufacturer: Logitech
Joystick Configurations
1.
Log out from the NVR server.
2.
Connect the controller device to the NVR server. To make sure the device is installed
properly, open
Windows
Start
menu
and enter
Devices and Printers
to
check the
status.
3.
Log in to NVR server, go to
Setup
page
System
tab, enter
“
Controller
” section and
select your product.
4.
You may assign specific commands from dropdown list to buttons 1~12 of the controller.
When the
setting is done, click “
Apply
”. The modification you did on one controller model
will be applied to the other joystick model as well.
5.
To validate its function, go to
Live View
page and focus on a PTZ device channel to
operate the supported PTZ operations.