ACTi MNR-310 - Manual (Page 29)

www.acti.com
MNR-310 System Administrator ’s Manual
29
Step 2: Connect the module ’s DC output to the MNR 310’s DC input
Attach and secure the 6-pin block connector to the power ignition control module ’s power
output socket, marked as “DC Output”:
Connect the module ’s DC output socket to MNR 310’s DC input using the power cord provided
with your MNR 310 by referring to the wiring definition and illustration below:
Step 3: Connect the module ’s S3 control port to the MNR 310’s power ignition.
Attach and secure the 3-pin block connector provided with your MNR-310 device to the power
ignition socket on your MNR:
1 Main Power Out
2 Main Power Out
3 GND
4 GND
5 LVDS GND
6 LVDS POWER OUT (+12V / 1A)