ACTi MNR-310 - Manual (Page 70)

www.acti.com
MNR-310 System Administrator ’s Manual
70
Device Status
To validate if you have successfully added a device to NVR
system, simply check the Device List on the left of Setup
Devices tab to see if the device name appears in the tree.
Point your mouse cursor over the device icon will bring up an
informat ion box containing the device’s IP Address , HTTP Port ,
Protocol and device type.
Status Icon Description
Icon Status Description
NVR server cannot retrieve video streaming. This may be that a video server is
not connected with cameras, or that the streaming is blocked by the firewall
between the device and NVR server. Please (1) ensure the device side is well
connected and can output video normally,(2) check the firewall and port
forwarding settings.
This device’s settings have been modified but not saved yet. If you leave these
modifications unsaved, they will not take effect by next time the server starts.
Please always remember to save upon every change.
NVR cannot build up connection with this device. Please check the device
connection settings (including IP Address, Port number, Account Name and
Password); or increase the “
Connection Timeout ” to allow more time for the
device to respond.
This device is currently connected, video is being transmitted and no recording
is proceeding.
This device is currently connected, and video is being recorded either manually
or according to the schedule.