ACTi MNR-310 User Manual
Page 40
Advertising
MNR-310 System Administrator
’s Manual
3.
Right-click on a disk title again, select
“
Convert to Dynamic Disk
…
”, check all the
installed disks and then click
“
OK
”.
4.
Right-click on a disk and select the volume type to make a new volume.
A
Volume Wizard
will come up to bring you through the configuration process. Make sure you
assign the desired
Drive Letter
and
Volume Label
to the volume via the wizard.
1
1
2
3
3
2
Advertising