ACTi MNR-310 - Manual (Page 72)

www.acti.com
MNR-310 System Administrator ’s Manual
72
If the device you wish to add supports ONVIF, you can select “ONVIF” for Media Type ,
and the settings page will appear as below. Please fill in the five fields marked below that
are required to communicate with the device – Media Type, IP Address, HTTP Port, User
Name and Password , and then click “Apply”.
4. By applying the settings, the NVR server will get the video stream, and the camera will
have been successfully added to the NVR system. You may click Video, PTZ, or Preset
Tour (available for camera with pan/tilt/zoom capabilities) tabs to configure other
properties.
5. To directly access the device configurator webpage, simply click “ Web Configurator ” on
top left to open it. Certain advanced settings are only available through the web
configurator and not through NVR.