Replacing a card, Preparing for the replacement, E pem out along the slide rails, as shown in – H3C Technologies H3C S12500 Series Switches User Manual
Page 107: Figure 71, Lane, as shown in, Figure 72
Advertising
97
Figure 71 Removing the PEM
Figure 72 Installing the PEM
Replacing a card
All cards of the S12500 are hot-swappable.
Preparing for the replacement
1.
Put on an ESD-preventive wrist strap, and make sure the wrist strap makes good skin contact and
is well grounded.
2.
Unpack the card to be installed. If the card has a protection cover, remove it first.
Figure 73 Removing the protection cover
1
1
2
2
Advertising