About system messages, Critical system startup messages – Grass Valley K2 Solo 3G Client Service Manual v.9.0 User Manual
Page 38
About system messages
The following messages are displayed to indicate system status:
•
Normal BIOS messages — These messages can be observed on a locally connected VGA monitor
during normal startup processes.
•
BIOS POST error messages — If there is a problem these messages are displayed on a locally
connected VGA monitor. During the Power On Self Test (POST), the BIOS checks for problems
and displays these messages.
•
AppCenter startup messages — As AppCenter opens the system determines if health is adequate
by checking critical subsystems. A dialog box is displayed that indicates progress and displays
messages.
•
Status bar and StatusPane messages — During normal operation AppCenter displays system
status messages on the status bar. From the status bar you can open the StatusPane to see both
current and previous messages. You can observe these messages in AppCenter on a locally
connected VGA monitor or on a network connected control point PC.
•
Storage Utility messages — While you are using Storage Utility, pop-up message boxes inform
you of the current status of the storage system.
Related Topics
Viewing AppCenter system status messages
on page 39
Critical system startup messages
on page 38
Critical system startup messages
The following messages appear in the AppCenter system startup message box as critical subsystems
are checked during startup processes. If a critical failure is detected, the K2 Solo 3G system is
rendered inoperable and the failure message appears.
Failure messages
Critical subsystem check messages
Startup error
System Startup
Missing or bad hardware
A real time processor is not functioning correctly
Hardware fault
Checking hardware…
One or more media disks failed to initialize
Checking media disks…
Missing or bad hardware
Missing or bad database
No file system is running
Checking file system…
Database fault
Checking database…
A real-time system failed to initialize
Checking real-time system status…
Failed to synchronize configurations
Updating configuration…
Unable to communicate with <service name>
Starting services…
38
K2 Solo 3G Service Manual
06 November 2012
System Messages