Grass Valley K2 Solo 3G Client Service Manual v.9.0 - Manual (Page 97)

Unfasten and disconnect cables
Additional tools needed:
• Side cutters
Before doing this task, do the following:
• Remove the top cover.
To remove any of the internal FRUs you must cut cable ties, free cables, and disconnect cables
as shown.
Related Topics
Installing components and dressing cables on page 102
Remove rear panel
Additional tools needed:
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• 3/16” nutdriver
06 November 2012 K2 Solo 3G Service Manual 97
Removing and replacing FRUs