Grass Valley XtenDD v.4.2.4 - Manual (Page 125)

2. Panel Operation
2 – 96 Operating Instructions – Rev. 1 / 7.2002
2.15.3.10 Other button functions
Entry of the Auto transition duration.
D
Press Trans dur. The key lights up.
D
Enter transition duration with numeric keypad.
D
The time is indicated in the FRAMES display.
D
Complete the entry with Enter or Trans dur again.
Note:
The Trans Dur entry function is selected by releasing the button. Hold down the
Trans Dur button and pressing the Store button starts the panel setup mode.
If you press this key, the status before the last recall of a snapshot or a timeline can
be restored even if several other operations have been performed in the meantime.
Function of the button:
D
If the TiM/E Memo is not playing a timeline and a snapshot register is selected,
Cut recalls the snapshot.
D
If the TiM/E Memo is not playing a timeline and a timeline register is selected,
Cut starts playing the timeline.
D
If the TiM/E Memo is playing a timeline, Cut stops playing the timeline;
another Cut continues playing the timeline.
D
If the TiM/E Memo is playing a timeline and the timeline is waiting,
Cut continues playing the timeline.
Function of the button:
D
If the TiM/E Memo is not playing a timeline and a snapshot register is selected,
Auto interpolates to the snapshot in a fixed period of time.
D
If the TiM/E Memo is not playing a timeline and a timeline register is selected,
Auto starts playing the timeline in a fixed period of time. This only works if the
timeline has no endless loops or waits and a transition duration other than 0 has
been selected.
D
If the TiM/E Memo is playing a timeline, Auto aborts playing the timeline.
D
A timeline played with Auto can’t be stopped/continued with Cut.
Trans dur
Undo
Cut
Auto