Grass Valley XtenDD v.4.2.4 - Manual (Page 230)

3. Menu Operation
3 – 83 Operating Instructions – Rev. 1 / 7.2002
For details refer to section Introduction.
See Annex 1. The list in Annex 1 contains all wipe patterns available in the switcher
together with their specific wipe number (in line with SMPTE). The table also indi-
cates which modifiers are possible with the individual wipe patterns.
Note: Softness and Border is possible with all listed patterns!
Enables the modifier Matrix for the selected wipe pattern.
Enables the modifier Aspect for the selected wipe pattern.
Enables the modifier Rotation for the selected wipe pattern.
Enables the modifier Multi for the selected wipe pattern.
Enables the modifier Modulate for the selected wipe pattern.
Enables the modifier Border for the selected wipe pattern.
Enables the modifier Softness for the selected wipe pattern.
The Reset button can be used to reset the enabled modifiers all at once.
In this twin button two functionalities are embedded. A normal single click means
activating the OK button. Double clicking means pressing the Digits button.
For details refer to section Introduction.
Menu Lock
Wipe Modifiers:
– Matrix
– Aspect
– Rotation
– Multi
– Modulate
– Border
– Softness
– Modifier Reset
– OK / Digits