Grass Valley XtenDD v.4.2.4 - Manual (Page 413)

3. Menu Operation
3 – 266 Operating Instructions – Rev. 1 / 7.2002
Shows a sorted list of all assignable inputs (Number, four char ident, eight char id-
ent) plus the entry None which must be used to assign no input to a button.
The arrow in the rigthmost column indicates the input that is assigned to the button
which is currently marked in the box Button.
Shows a sorted list of all assignable crosspoint buttons.
The arrow in column 1 indicates the buttons which are assigned to the input cur-
rently marked in box Input.
Column 2 is the numeric list of all buttons.
Column 3 is a helper to show whether the Button is in first 2
nd or 3 rd level.
Column 4 and 5 show the number and the four char ident of the assigned input.
Dashes (– – –) indicate that no input is assigned.
Shortcut for pre-selecting bus row ALL.
The vertical cursor softkeys and the vertical cursor digipot are used to navigate
within a list box. The complete cursor control is always relevant.
Insert the selected input at the current cursor position and moves the previous in-
puts downwards to the end. At the end of the levels, the last assignment get loost!
Deletes the selected input at the current cursor position and moves the all the next
inputs upwards. At the end of the levels, a None will be inserted.
Resets the assigment to the following states:
Moves the cursor in the right table downwards.
Moves both cursors downwards.
Box Input
Box Button
All Bus Rows
Cursor
↑ ↓
Insert Position
Delete Position
Reset Assign
Assign None
Assign