Grass Valley XtenDD v.4.2.4 - Manual (Page 143)

2. Panel Operation
2 – 114 Operating Instructions – Rev. 1 / 7.2002
Note:
When using 3.5” disk adapters in the panels, proceed according to the in-
structions of manufacturer and his safety regulations.
Voltage supply of the adapter is made by two Lithium round cells, type CR2016.
Insert the Lithium round cells according to the instructions of the manufacturer. Pay
attention to the polarity. Insert the disk and make sure not to touch the contacts.
How the disk has to be placed when inserting, is described in the operating instruc-
tions of the manufacturer. See also Fig. 203.
The disk adapter has to be inserted into the 3.5” floppy disk drive of the panel like
a normal disk.
Smart Media Card
3.5” disk adapter
from Olympus
Fig. 203: Inserting the disk
Note:
External disk drives being controlled via PC card or USB interfaces, as well
as disk drives with a high capacity (e.g. LS drives with 120MB) are not suited
for connection to the switcher panels RPS35–4, RPS35–3 and RPS35–2 !