Grass Valley XtenDD v.4.2.4 - Manual (Page 316)

3. Menu Operation
3 – 169 Operating Instructions – Rev. 1 / 7.2002
3.14.5.11 Priority Index Card
Index card with one pages:
All commands on this index card are only effective when the global channel is en-
abled (Setup index card)
Channel 1 Set the combiner priority for channel 1.
If the channel priority is lower than another channels, the channel number (”1”) is
left of the other numbers, separated by a dash (”–”). If the channel has z–priority
with other channels, these channels are not separated by a dash and highlighted
with yellow background.
Example: 4 – 12 – 3
This indication means: channel 4 has the lowest priority, channel 1 and 2 are to-
gether in one group of z–priority, but this group has always a higher priority than
channel 4 and a lower priority than channel 3.
Channel 2 See channel 1
Channel 3 See channel 1
Channel 4 See channel 1