Grass Valley XtenDD v.4.2.4 - Manual (Page 202)

3. Menu Operation
3 – 55 Operating Instructions – Rev. 1 / 7.2002
Note: Please note that the wipe generators can be used simultaneously for
several applications which may interact with one another.
The Box button serves to select a rectangular mask for masking. The size of the
mask can be adjusted with the four controls Left, Right, Top, and Bottom. The
mask can be positioned with the positioner.
The Box Softness digipot serves to adjust the softness of the mask. The respec-
tive digipot is activated after selecting the Select button.
The Mask Store button serves to select the mask store as mask source.
Allows the operator to use the trackball to position the mask on the screen (only with
Pattern or Mask Source). See also Position Mode button above.
For details refer to section Introduction.
– Box
Box Softness
(Seraph HD and
XtenDD only)
Mask Store
Shift
Digits