Grass Valley XtenDD v.4.2.4 - Manual (Page 172)

3. Menu Operation
3 – 25 Operating Instructions – Rev. 1 / 7.2002
Each ME can be used as Master M/E. If a coupled M/E is modified directly via a
control unit the master ME is not affected.
Coupled recources
Basic recources:
After selection the M/E Couple Mode in the Config EBox menu, the following M/E
resources are coupled for a master M/E:
D
PGM and PST bus (optionally by one substitution table) at M/E crossbar
D
CUT, AUTO and FADER at M/E transition.
Key recources:
By selecting Key Couple in the Status menu, additionaly the following function are
coupled to a master M/E:
D
Fill and Key busses (optionally by a substitution table) of the keyers.
Together with the key memory, most keyer adjustments can be recalled.
Comp recources:
By selecting Comp Couple in the Status menu, additionaly the following functions
are coupled for a master M/E:
D
Video component selection, Transition Type, Loop, Black Preset and
Transition PVW.
TiM/E-Memo handling
ME coupling works on command level. This means that TiM/E-Memo recalls and
application load are disregarding M/E coupling. It is used to preset M/Es.
Applications
Every application has its own, complete M/E-coupled structure. If an application is
loaded or the coupled state of one application is changed, this new modification is
checked and accepted or rejected (see Coupling rules).