Grass Valley XtenDD v.4.2.4 - Manual (Page 439)

3. Menu Operation
3 – 292 Operating Instructions – Rev. 1 / 7.2002
Renames the currently selected register. The user can rename the 4, 8 and 20
character names and change the 256 character comment.
Stores the currently in Define Memo enabled entities to the selected (blue cursor
frame) register as a snapshot.
Modifies a stored snapshot according to the currently defined Define Memo. The
state of all currently in the Define Memo enabled entities will be changed in the se-
lected snapshot to the currently adjusted state, e.g. if the border color of a wipe ef-
fect has to be changed from red to green in a already stored snapshot you have
to select this snapshot, enable only the wipe in the Define Memo and adjust the
mixer to the state where the border color is green. Then press Modify. The border
color of this wipe now will be changed in the selected snapshot to green.
Rename
Store
Modify