Grass Valley XtenDD v.4.2.4 - Manual (Page 321)

3. Menu Operation
3 – 174 Operating Instructions – Rev. 1 / 7.2002
3.14.5.15Setup Index Card
Index card with 1 pages: Local Channels
Page Local Channels
Channel 1 – Channel 4
When you start creating an effect in the workbuffer, this is the first page to set.
The possible modes per channel are:
F unused
F
single
F
pair
F triple (not for channel 4)
F
quadruple
If you decide to use the DVx like you would use an external DVE – just as one device
– your choice will always be quadruple. When you only need two channels for a
certain effect, just set the size of the channels not necessary to zero. But in this case
you only can use one DVx effect at a time.
When you want to use the DVx as multiple independent DVEs, only select the
channels needed – to leave the other ones available for other, simultaneously
recalled effects.