Grass Valley XtenDD v.4.2.4 - Manual (Page 405)

3. Menu Operation
3 – 258 Operating Instructions – Rev. 1 / 7.2002
3.16.2.3 Fixed Aux Bus
Via an additional entry for each Aux bus in the environ.ini file, an Aux bus can be
permanently “wired” with a defined source, i.e. the indicated source is switched on
the Aux bus and cannot be changed any more. Even with recalls or timelines, the
source of the Aux bus remains unchanged. To be able to switch the Aux bus source
again, the entry in the environ.ini file has to be changed again.
Syntax in environ.ini file (Examples)
[AUXBUS1]
PermanentInput=0xFF,0x03,0x01,0x02 AUX Bus 1 is permanently set to
==== ==== ==== ==== M/E3 Preset
...
[AUXBUS3]
PermanentInput=0x05,0x00,0x00,0x00 AUX Bus 1 is permanently set to
==== Input 5
...
[AUXBUS4]
PermanentInput=0xFF,0xFF,0xFF,0xFF AUX Bus 4 is not fixed
The repective codes are listed of the next pages.