Grass Valley XtenDD v.4.2.4 - Manual (Page 341)

3. Menu Operation
3 – 194 Operating Instructions – Rev. 1 / 7.2002
Index card for selecting Tally ports and setting the MI-3040 box addresses.
Please note:
Two MI–3040 boxes can be addressed as to be one box with 80bits if they have
the same MPK address and if they are installed in neighbour colums in the table
obove. Within a tally channel (Red, Green, Yellow) same box addresses may be
used. However, a box address cannot be used in different colours.
For details refer to the section “Tally Signalling” in your Planning & Installation
Manual.
Pressing the button Tally Out Assignment opens a new dialog page for Tally As-
signment:
Tally