Grass Valley XtenDD v.4.2.4 User Manual
Page 164
3. Menu Operation
3 – 17
Operating Instructions – Rev. 1 / 7.2002
3.4
STARTUP MENU
After having switched on the switcher control panel, the Startup menu is shortly
called with the DD35 logo and then automatically the menu available last with all
selected parameters.
With initial startup, the Startup menu is called in order to enable selection of the
main frame and establishing the connection.
The run-up bitmap (big one DD35 logo) and the background bitmap in the Startup
menu can be replaced by user defined ones. During run-up, the system is looking
for the files
c:\programme\dd35\bin\logo.bmp
and
c:\programme\dd35\bin\logo2.bmp
If not available, the internal DD35 logo will be displayed. The file
logo2.bmp
is op-
tionally. If not available, the
logo.bmp
is used for both purposes.