SMA CLUSTER CONTROLLER - Manual (Page 20)

Position Designation
E Irradiation sensor
F Cluster Controller
G Industrial load
H Sunny Portal
I Router
K Ripple control receiver or remote terminal unit
L Energy meter
M Control room
N Grid control room
O Substation
P Utility grid
3.1.2 Type Label
The type label clearly identifies the product. The type label can be found on the back of the
enclosure. You can read off the following data from the type label:
• Device type (Type)
• Serial Number
• Hardware version (Version)
• Model
• Device-specific characteristics
You will require the information on the type label to use the product safely and when seeking
customer support from Service (see Section 21 "Contact", page 116).
Symbols on the Type Label
Symbol Designation Explanation
C-Tick The product complies with the require-
ments of the applicable Australian
EMC standards.
CAN ICES-3 (A)/
NMB-3(A) IC marking The product complies with the require-
ments of the applicable Canadian
EMC standards.
Indoors The product is only suitable for indoor
installation.
FCC designation The product complies with the require-
ments of the applicable FCC stan-
dards.
3 Product Description SMA Solar Technology AG / SMA America, LLC
User Manual ClusterController-BA-en-14 20