SMA CLUSTER CONTROLLER - Manual (Page 34)

Parameter Explanation
Max. change in case of power
increase Indicates the maximum change in percentage points per time
interval that occurs once an active power limitation setpoint has
been canceled
Max. change in case of power
reduction Indicates the maximum change in percentage points per time
interval that occurs once an active power limitation setpoint has
been received
Status configuration
Symbol Explanation
Corresponds to the value "Logical 1" (= 24 V)
Corresponds to the value "Logical 0" (= 0 V)
4.2.4.6 Events Menu
In the menu Events, Cluster Controller events or inverter events in the system are displayed in the
form of an event log. The Cluster Controller requests the events list from the inverters directly. The
events displayed in each case depend on the inverter that is selected in the system tree, on the user
group, and on the filter settings for the event types (Information, Warning, Error).
Event Types
Symbol Designation Explanation
Error The Error event has existed for some time and
could not yet be remedied.
Incoming error An Error event has occurred.
Outgoing error The Error event no longer exists.
Warning The Warning event has existed for some time
and could not yet be automatically remedied.
Incoming warning The Warning event has occurred.
Outgoing warning The Warning event no longer exists.
Information The Information event has existed for some
time.
Incoming information The Information event has occurred.
Outgoing information The Information event no longer exists.
4 User Interface of the Cluster Controller SMA Solar Technology AG / SMA America, LLC
User Manual ClusterController-BA-en-14 34