SMA CLUSTER CONTROLLER User Manual
Page 97
Advertising
LED
Status
Cause and corrective measure
Status (
)
glowing red
The SD memory card in the Cluster Controller may
be defective.
Corrective measures:
• Check the Cluster Controller event log (see
• If the SD memory card is defective, contact
the Service (see Section 21, page 116).
flashing red
The Cluster Controller could not start correctly. A
system error has occurred.
Corrective measures:
• Contact the Service (see Section 21, page 116
).
18 Troubleshooting
SMA Solar Technology AG / SMA America, LLC
User Manual
97
ClusterController-BA-en-14
Advertising