Yaskawa GPD 506/P5 to F7 - Manual (Page 10)

Product Transition Guide
GPD506/P5 to F7
PL.F7.05 Page 10 of 54
Digital Operator Comparison
•
Enhanced LCD operator with built-in copy function and parameter verify for F7
•
Optional LED operator available for F7
•
LCD contrast adjustment
•
Simplified parameter grouping for easier navigation and set-up
•
F7 copy keypad is capable of uploading all of the parameter settings from the F7 drive memory.
o
Upload of GPD506/P5 parameters to F7 not possible at this time
o
F7 Drives must have the same software version, model, and control mode to copy parameters.
•
A Quick Start menu is added to aid in simple start-ups.
•
The Quick Start menu consists of 26 parameters. The Advanced menu is the other menu choice.
Simplified Menu Structure in F7:
GPD506/P5 F7
-- Operation “DRIVE”
Quick Start -- 16 Parameters Quick Setting “QUICK”
Programming (All Parameters) Programming “ADV”
-- Modified Constants “VERIFY”
-- Auto-Tuning “A.TUNE”
--
GPD506/P5 Operator New F7 Operator
-DRIVE- Rdy
Frequency Ref
U1- 01 = 60.00Hz
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
U1-02= 60.00Hz
U1-03= 10.05A
Drive Mode Indicators
Data Display
Displays monitor data, parameter data and settings
RUN & STOP Indicators
Ready Display
Drive can operate when a drive command is input
1 line x 13 characters
3 lines x 16 characters
Menu Display
Keys
-QUICK-
C ont rol M et hod
---------------------------------
A1- 02= 3 *3*
Flux Vector
“2”
Factory Default
Present Selection
(user adjusts)
Currently Programmed
LCD Display
2 Line x 16 Characters
Frequency Ref
U1-01 = 0.00Hz