Yaskawa RC5 Converter - Manual (Page 37)

4.4 Using the Digital Operator
YASKAWA ELECTRIC TOEP C710656 01C YASKAWA - RC5 Instruction Manual 37
4.4 Using the Digital Operator
This section describes the component names and functions of the Digital Operator. The component names and functions are shown in Figure 4.2 and
Key function are described in Table 4.1 .
Figure 4.2
Figure 4.2 Digital Operator Component Names and Functions
LOCAL
REMOTE
MENU
DIGITAL OPERATOR
JVOP-130
ESC
DATA
ENTER
JOG
FWD
REV RESET
RUN STOP
DRIVE FWD REV REMOTE
SEQ REF
Dc Bus Voltage
U1-02 = 300 VDC
Keys
Execute operations such as setting
user parameters and monitoring.
Data Display
Two-line LCD that displays data for monitor-
ing, parameters, and set values with 16
characters per line.
Operation Mode Indicators
DRIVE: Lit when in operation mode.
FWD:
Not used
REV: Not used
SEQ: Lit when the run command from the
control circuit terminal is enabled.
REF: Not used