Yaskawa RC5 Converter - Manual (Page 6)

4 YASKAWA ELECTRIC TOEP C710656 01C YASKAWA - RC5 Instruction Manual
i.1 Conditions of Acceptability
i.1 Conditions of Acceptability
◆ NEC, CEC and UL Compliance
In order to comply with the NEC, CEC and UL, the following conditions of use must be strictly adhered to:
■ Surge Protector Installation
■ Current Suppression Reactor Installation
■ Terminal Blocks
■ Installation Environment
◆ CSA Standards Compliance
The RC5 is CSA certified as following.
■ Products
CLASS 3211 06
INDUSTRIAL CONTROL EQUIPMENT
Motor Controllers Miscellaneous
CLASS 2411 02
ELEVATOR EQUIPMENT
Enclosed Elevator and Escalator Electrical Equipment
■ Applicable Requirements
CAN/CSA C22.2 No.0.4-04
Bonding of Electrical Equipment
CAN/CSA C22.2 No.14-05
Industrial Control Equipment
CSA B44.1-04/ASME A17.5-2004
Elevator and Escalator Electrical Equipment
Figure i.1
Figure i.1 CSA B44.1-04/ASME A17.5-2004 Mark
• An MOV must be installed on the input of the RC5 Unit.
• The Current Suppression Reactor must be installed as shown in Figure 3.1 .
• The Power Terminal Blocks of the RC5 unit are for factory wiring use only.
• Install the RC5 Unit in a protective enclosure suitable to its environment.
CSA B44.1 /
ASME A17.5